TA Programming announces availability of Studio MIDI And CV Interface full synthesizer control system debut
Following the showcase in October at Sheffield’s Synthfest UK 2019, TA Programming announces their inaugural Studio MIDI And CV Interface full synthesizer control system — capable of controlling multiple synthesizers simultaneously via voltage control outputs and MIDI/USB with extra-low latency while keeping analog instruments, vintage or otherwise, perfectly in tune with each other.
On the face of it, then, the Studio MIDI And CV Interface full synthesizer control system is creatively kitted out to target the hotly-contested competition out there already. After all, those four universal CV CONTROL outputs can perform any function regardless of whether it is for producing Pitch, Gate, or Aux signals.
An unlimited number of universal CV CONTROL outputs can quickly be created by daisy-chaining multiple interfaces via the MIDI ports. Also, any source — such as Pitch, Note On/Off, Velocity, Aftertouch, any MIDI CC number, signals from a DAW, and more besides — can be selected via USB or MIDI.
Fortunately for anyone putting the Studio MIDI And CV Interface to the test, the voltage of the configured output is completely user-definable between -9V and +10V, providing plenty of range to satisfy the requirements of almost all synthesizers, past and present. Put it this way: with this level of versatility, the Studio MIDI And CV Interface provide its users with complete control over note range scale — from microtonality all the way through to the limits of the connected synthesizer. Thankfully, TA Programming’s proprietary tuning technology is capable of handling even the most stubborn scaling issues, effectively eliminating scaling and tuning issues on any analog synthesizer, including non-linearities. This technology is built upon a six-point multi-mapping system that uses advanced interpolation and modeling algorithms all within a floating-point mathematical model before conversion to control voltages are applied in real-time. In other words, once a tuning profile has been configured for the synthesizer concerned, TA Programming’s proprietary tuning technology works out the control voltages said synthesizer needs, regardless of tempco (temperature compensating) resistor variation, in order to produce pitch-perfect notes in real-time — a must-have for owners of vintage or more modern analog synthesizers alike!
Additionally, the Studio MIDI And CV Interface is MPE (MIDI Polyphonic Expression) compatible, capable of sending out full MPE via MIDI DIN or mapping single channel/polyphonic MPE out of the universal CV CONTROL outputs. As all five control dimensions are natively supported, users can be sure that their synthesizers will be as musically expressive as allowed by the MPE method.
Meanwhile, the interface itself has internal circuitry powered by USB. Ultimately, however, TA Programming pushed itself hard to ensure that the power supply can tolerate variances in input voltage so that the resulting supply is always as clean as possible, providing the highest control voltage accuracy, as well as preserving tuning and configuration regardless of the USB host.
Having said all that, TA Programming’s powerful control software allows anyone to completely configure their Studio MIDI And CV Interface. In addition to this, they can host USB MIDI controllers in the software itself, thereby bypassing their DAW, if desired. Said software also provides plentiful MIDI processing features — from LFOs to BPM-locked arpeggiators, keyboard splitting over MIDI, and much more. TA Programming plans to regularly update the interface’s firmware and control software so that its users can always access the latest features following their initial purchase.
Last, but by no means least, the Studio MIDI And CV Interface always automatically stores its user’s current configuration with no need to click save. So feel free to travel between a recording studio and performance venue safe in the knowledge that their current configuration will automatically load when the interface is powered back up. Upon connection to their computer, the control software will automatically pull the current configuration from the interface itself to allow for easy editing. And as if this was not exciting enough, an unlimited number of presets and profiles for all the synthesizers in anyone’s setup can be saved to the computer and reloaded into the interface at any time.
TA Programming looks all set to play to win with its inaugural Studio MIDI And CV Interface. Owners of vintage and more modern synthesizers simply owe it to themselves and their treasured instruments to test TA Programming’s debut design. It is no ordinary MIDI-to-CV convertor, clearly!
Availability and Pricing
The Studio MIDI And CV Interface is initially available for purchase — priced at £249.00 GBP — directly through TA Programming here: