Table of Contents
Leapwing Audio Holiday Sale
RootOne – Multi-Effect by Leapwing Audio
Multi-band Subharmonics Generator & Shaper for Complete Low-end Control
Don’t compromise on your low-end. RootOne (Affiliate Link) is designed from the ground up as a new way to generate and shape subharmonic frequencies. Leapwing set out to create the cleanest low-end possible, phase-aligned with the original, making the result sound like it comes from one source. RootOne (Affiliate Link) comes with 3 low-frequency bands at custom crossover frequencies. Each band will look for a frequency an octave above the selected band, and after carefully analyzing amplitude and phase, it then generates a clean sound within that band.
Phase Aligned Subharmonics Generator
Traditional subharmonics generators use a band-passed pitch-shifted signal, which often results in a disconnection from the original sound. Leapwing therefore opted to develop their own pitch & phase tracking algorithm and combined that with a clean signal generator.
Full Control over Saturation, Dynamics, and Decay
A 4th saturation band allows you to create lower midrange harmonics, giving you full control over the tone and sound of your low-end. Each of the low frequency bands also has control over dynamics, decay and drive.
Easy to Use and Intuitive GUI
Leapwing aims to build plugins that sound good from the moment you start using them, not having to waste precious creative time. Leapwing spent countless hours of R&D time to look at the best ways of visualizing all the bands so you can tweak everything intuitively.
DynOne – Dynamic Processor by Leapwing Audio
The Ultimate Smart Parallel Multi-band Dynamics Processor
Many multiband compressors take too much time to set up and tweak. DynOne 3 (Affiliate Link) has been redesigned with a beautiful resizable retina design that focuses on workflow. It also includes variable crossover filters, a unique weighting algorithm, and a proprietary Center-Side Mode. DynOne 3 (Affiliate Link) also uses min-max values for attack and release and applies variable timing values depending on whether the signal is transient in nature or not. You can simply blend in your compressed signal with the original.
Highest Quality XO Filters
Leapwing Audio’s crossover filters have been custom designed to interact with each other, in order to avoid phase alignment issues between bands, something you do have with traditional multi-band compressors. In DynOne 3 Leapwing Audio even made them variable so you can tweak them fully.
Adaptive Attack/Release Timing
Leapwing Audio felt that having a traditional attack and release times didn’t really give you the best sounding result. When you’re working with transients vs sustained sounds, you often want to have different attack and release times. This is why we use min and max attack/release times.
Easy to Use and Intuitive GUI
Leapwing Audio aims to build plugins that sound good from the moment you start using them, not having to waste precious creative time. Leapwing Audio spent countless hours of R&D time to look at the best ways of visualizing all the bands so you can tweak everything intuitively.
CenterOne – Stereo Width by Leapwing Audio
Adjust your phantom center signal without changing the panorama or spectral characteristics.
Feel like the vocal is just a tiny bit too loud, but don’t want to change any of the stereo spread. CenterOne (Affiliate Link) allows you to bring the phantom center in a stereo signal forward or backward without changing the positions of any panned signals.
- Phantom Center Manipulation: Bring the phantom center signal in a stereo stream forward or push it back by up to 9dB without changing any of the panorama
- Extract Left-Center-Right: Convert a stereo signal into an LCR stem in a unique bit-identical way
- Simple yet Beautiful Design: Beautiful Retina interface with unique design, focused on the optimal workflow
- Extremely Good Filters: The highest quality audio processing algorithms available
Feel like the vocal is just a tiny bit too loud, but don’t want to change any of the stereo spread. CenterOne allows you to bring the phantom center of a stereo signal forward or backward without changing any of the panned signals.
Extract Center Channel from A Stereo Source
CenterOne (Affiliate Link) also gives you LCR plugin outputs so you can decide to put an effect on just the center extracted channel. Mixing LCR back together gives you a bit-identical copy of the original signal.
CenterOne’s “Center Prominence” algorithm analyses the precise location of the sound sources in the stereo signal for a careful processing of each bit of your audio, respectful of the original location of the sources. The alternative MS-technique that attempts to change the level of the M part of the signal, fails to achieve a good performance due to the inherent drawback of the lateral sources leaking into the M part of the signal split.
Pricing and Availability
Leapwing Audio creates unique processors for audio professionals. Save 25% off their entire range, with each plugin now available for only £133.95 / $149 each (Affiliate Link).